게임 컨트롤러 지원

sudo apt install joystick jstest-gtk -y

# View input devices
ls /dev/input/js*
cat /proc/bus/input/devices | grep -A 5 "Gamepad\|Controller\|Joystick"
 
# Use evtest for detailed information
sudo apt install evtest -y
sudo evtest

# jstest-gtk graphical controller test
jstest-gtk
 
# Or use command-line testing
jstest /dev/input/js0

# The xpad kernel driver is loaded by default
lsmod | grep xpad

# Install dependencies
sudo apt install dkms cabextract -y
 
# Clone and install xone
git clone https://github.com/medusalix/xone
cd xone
sudo ./install.sh
 
# Download firmware
sudo xone-get-firmware.sh

sudo apt install dkms -y
git clone https://github.com/atar-axis/xpadneo.git
cd xpadneo
sudo ./install.sh

# Install dualsensectl
sudo apt install dualsensectl -y
 
# Set light bar color
dualsensectl lightbar 0 0 255
 
# Check battery level
dualsensectl battery
 
# Set microphone LED
dualsensectl microphone-led on

# Connect via USB first, then use Bluetooth
sudo apt install bluez-plugins bluez-tools -y
 
# PS3 controllers require a special pairing process
# Connect via USB first, then unplug to use Bluetooth

# Install build dependencies
sudo apt install build-essential cmake libevdev-dev libudev-dev -y
 
# Build and install from source
git clone https://github.com/DanielOgorchock/joycond.git
cd joycond
cmake -B build
cmake --build build
sudo cmake --install build
sudo systemctl enable --now joycond

# Install Steam's udev rules (usually installed with Steam)
sudo apt install steam-devices -y
 
# Or manually add permissions
sudo usermod -aG input $USER

flatpak install flathub io.github.antimicrox.antimicrox -y
flatpak run io.github.antimicrox.antimicrox

# Graphical calibration with jstest-gtk
jstest-gtk
 
# Command-line calibration
jscal /dev/input/js0

# Check USB devices
lsusb
 
# Check kernel messages
dmesg | tail -20
 
# Reload driver
sudo modprobe -r xpad && sudo modprobe xpad

# Restart Bluetooth service
sudo systemctl restart bluetooth
 
# Remove pairing and reconnect
bluetoothctl
# In bluetoothctl:
# remove <MAC-address>
# scan on
# pair <MAC-address>
# connect <MAC-address>
# trust <MAC-address>