SSH Seguridad

# Generate an Ed25519 key (recommended, more secure and faster)
ssh-keygen -t ed25519 -C "your_email@example.com"
 
# If you need compatibility with older systems, use RSA 4096-bit
ssh-keygen -t rsa -b 4096 -C "your_email@example.com"
 
# You will be prompted:
# Enter file in which to save the key (/home/user/.ssh/id_ed25519):
# Enter passphrase (empty for no passphrase):
# It is strongly recommended to set a passphrase

# Method 1: Using ssh-copy-id (recommended)
ssh-copy-id -i ~/.ssh/id_ed25519.pub user@server
 
# Method 2: Manual copy
cat ~/.ssh/id_ed25519.pub | ssh user@server "mkdir -p ~/.ssh && chmod 700 ~/.ssh && cat >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys"
 
# Method 3: Manual operation
# On the server:
mkdir -p ~/.ssh
chmod 700 ~/.ssh
nano ~/.ssh/authorized_keys
# Paste the public key content
chmod 600 ~/.ssh/authorized_keys

# Log in using the key
ssh -i ~/.ssh/id_ed25519 user@server
 
# If configured as the default key, log in directly
ssh user@server

# Start SSH Agent
eval "$(ssh-agent -s)"
 
# Add a key to the Agent (enter the passphrase once to cache it)
ssh-add ~/.ssh/id_ed25519
 
# List loaded keys
ssh-add -l
 
# Remove all cached keys
ssh-add -D

sudo nano /etc/ssh/sshd_config

# Disable password authentication
PasswordAuthentication no

# Disable empty passwords
PermitEmptyPasswords no

# Disable keyboard-interactive authentication
KbdInteractiveAuthentication no

# Completely prohibit root from logging in via SSH
PermitRootLogin no

# Or only allow root to log in with keys (not recommended)
# PermitRootLogin prohibit-password

# Use a non-standard port (reduces automated scanning)
Port 2222

sudo ufw allow 2222/tcp
sudo ufw delete allow 22/tcp

# Only allow specific users to log in
AllowUsers admin deployer

# Only allow specific groups to log in
AllowGroups sshusers

# Deny specific users
DenyUsers guest test

# Limit authentication attempts
MaxAuthTries 3

# Limit concurrent unauthenticated connections
MaxStartups 3:50:10

# Session timeout (disconnect after 300 seconds of inactivity)
ClientAliveInterval 300
ClientAliveCountMax 2

# Disable X11 forwarding (servers usually don't need it)
X11Forwarding no

# Disable Agent forwarding (unless actually needed)
AllowAgentForwarding no

# Disable TCP forwarding (unless actually needed)
AllowTcpForwarding no

# Use strong encryption algorithms
# Note: OpenSSH 10.2 (26.04) already prefers the post-quantum KEX mlkem768x25519-sha256 by default.
# Avoid overriding KexAlgorithms — hardcoding a list freezes the algorithm set
# and may end up dropping newly added post-quantum defaults in the future. Keep the secure defaults.
#
# Only override for troubleshooting or temporary interop with old clients, and always put the post-quantum algorithm first:
# KexAlgorithms mlkem768x25519-sha256,sntrup761x25519-sha512@openssh.com,curve25519-sha256@libssh.org,curve25519-sha256
Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com
MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com

# Display a login banner
Banner /etc/ssh/banner.txt

# Login grace time
LoginGraceTime 30

# Check configuration syntax
sudo sshd -t
 
# Restart SSH service (on Ubuntu the unit is ssh.service; sshd is just an alias)
sudo systemctl restart ssh
 
# Note: on 26.04 ssh listens via socket activation by default,
# so after changing the port you must reload the socket unit:
sudo systemctl daemon-reload
sudo systemctl restart ssh.socket
 
# Important: Test the connection in a new terminal window -- do not close the current one!
ssh -p 2222 user@server

# Install
sudo apt install fail2ban
 
# Start and enable at boot
sudo systemctl enable --now fail2ban

sudo nano /etc/fail2ban/jail.local

[DEFAULT]
# Ban duration (seconds)
bantime = 3600
 
# Detection time window (seconds)
findtime = 600
 
# Maximum failed attempts
maxretry = 3
 
# Ban action
banaction = ufw
 
# Ignored IPs (whitelist)
ignoreip = 127.0.0.1/8 ::1 192.168.1.0/24
 
# Email notifications
# destemail = admin@example.com
# sendername = Fail2Ban
# mta = sendmail
# action = %(action_mwl)s
 
[sshd]
enabled = true
port = 2222
filter = sshd
logpath = /var/log/auth.log
maxretry = 3
bantime = 3600

# View status
sudo fail2ban-client status
 
# View SSH jail status
sudo fail2ban-client status sshd
 
# View banned IPs
sudo fail2ban-client status sshd | grep "Banned IP"
 
# Manually ban an IP
sudo fail2ban-client set sshd banip 203.0.113.50
 
# Manually unban an IP
sudo fail2ban-client set sshd unbanip 203.0.113.50
 
# View fail2ban logs
sudo tail -f /var/log/fail2ban.log
 
# Reload configuration
sudo fail2ban-client reload

# Nginx authentication protection
[nginx-http-auth]
enabled = true
filter = nginx-http-auth
port = http,https
logpath = /var/log/nginx/error.log
maxretry = 3
 
# Nginx malicious requests
[nginx-botsearch]
enabled = true
filter = nginx-botsearch
port = http,https
logpath = /var/log/nginx/access.log
maxretry = 2

nano ~/.ssh/config

# Global settings
Host *
    ServerAliveInterval 60
    ServerAliveCountMax 3
    AddKeysToAgent yes

# Production server
Host prod
    HostName 203.0.113.10
    User admin
    Port 2222
    IdentityFile ~/.ssh/id_ed25519_prod

# Jump host
Host bastion
    HostName 203.0.113.20
    User jump
    Port 2222
    IdentityFile ~/.ssh/id_ed25519

# Connect to an internal server via jump host
Host internal
    HostName 10.0.1.50
    User admin
    ProxyJump bastion
    IdentityFile ~/.ssh/id_ed25519

ssh prod
ssh internal

# Install
sudo apt install libpam-google-authenticator
 
# Each user runs the initialization
google-authenticator
# Follow the prompts to complete setup and scan the QR code
 
# Configure PAM
sudo nano /etc/pam.d/sshd
# Add:
# auth required pam_google_authenticator.so
 
# Configure SSH
sudo nano /etc/ssh/sshd_config
# Set:
# AuthenticationMethods publickey,keyboard-interactive
# KbdInteractiveAuthentication yes
 
sudo systemctl restart ssh

# Confirm the KEX algorithms supported by your OpenSSH (should include mlkem768x25519-sha256)
ssh -Q kex
 
# Inspect the KEX algorithm actually negotiated for a connection
ssh -v user@server 2>&1 | grep "kex:"

# View successful login records
last -n 20
 
# View failed login records
lastb -n 20
 
# View SSH authentication logs
journalctl -u ssh.service --since today | grep -E "Accepted|Failed"
 
# Count failed login IPs
journalctl -u ssh.service | grep "Failed" | awk '{print $(NF-3)}' | sort | uniq -c | sort -rn | head -20
 
# View current SSH connections
who
w
ss -tnp | grep :22