AbrirVPN / WireGuard VPN

sudo apt update
sudo apt install wireguard -y
 
# Verify the kernel module
sudo modprobe wireguard
lsmod | grep wireguard

# /etc/wireguard is writable only by root, so the commands below require root.
# It is recommended to run sudo -i to switch to root first, or add sudo to each command.
 
# Generate server key pair
wg genkey | sudo tee /etc/wireguard/server_private.key | wg pubkey | sudo tee /etc/wireguard/server_public.key
sudo chmod 600 /etc/wireguard/server_private.key
 
# Generate client key pair
wg genkey | sudo tee /etc/wireguard/client1_private.key | wg pubkey | sudo tee /etc/wireguard/client1_public.key
 
# Read key contents
SERVER_PRIVKEY=$(sudo cat /etc/wireguard/server_private.key)
SERVER_PUBKEY=$(sudo cat /etc/wireguard/server_public.key)
CLIENT1_PRIVKEY=$(sudo cat /etc/wireguard/client1_private.key)
CLIENT1_PUBKEY=$(sudo cat /etc/wireguard/client1_public.key)

# Create server configuration
sudo tee /etc/wireguard/wg0.conf << EOF
[Interface]
Address = 10.0.0.1/24
ListenPort = 51820
PrivateKey = ${SERVER_PRIVKEY}
 
# Enable IP forwarding and NAT (for client internet access)
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
 
# Client 1
[Peer]
PublicKey = ${CLIENT1_PUBKEY}
AllowedIPs = 10.0.0.2/32
EOF
 
sudo chmod 600 /etc/wireguard/wg0.conf

# Enable IP forwarding
echo "net.ipv4.ip_forward = 1" | sudo tee -a /etc/sysctl.d/99-wireguard.conf
sudo sysctl -p /etc/sysctl.d/99-wireguard.conf
 
# Start WireGuard
sudo systemctl enable --now wg-quick@wg0
 
# Check status
sudo wg show
 
# Firewall
sudo ufw allow 51820/udp

# Client configuration file
sudo tee /etc/wireguard/client1.conf << EOF
[Interface]
Address = 10.0.0.2/24
PrivateKey = ${CLIENT1_PRIVKEY}
DNS = 8.8.8.8, 1.1.1.1
 
[Peer]
PublicKey = ${SERVER_PUBKEY}
Endpoint = your-server-ip:51820
AllowedIPs = 0.0.0.0/0        # Route all traffic through VPN
# AllowedIPs = 10.0.0.0/24    # Only route VPN subnet through VPN (split tunneling)
PersistentKeepalive = 25
EOF
 
sudo chmod 600 /etc/wireguard/client1.conf
 
# Start the connection (the interface name is taken from the config file name client1)
sudo wg-quick up client1
 
# Disconnect
sudo wg-quick down client1

# Generate new client keys on the server
wg genkey | tee /etc/wireguard/client2_private.key | wg pubkey > /etc/wireguard/client2_public.key
CLIENT2_PUBKEY=$(cat /etc/wireguard/client2_public.key)
 
# Hot-add a peer (no service restart needed)
sudo wg set wg0 peer ${CLIENT2_PUBKEY} allowed-ips 10.0.0.3/32
 
# Or edit the configuration file and reload
sudo systemctl restart wg-quick@wg0

sudo apt install qrencode -y
 
# Generate a QR code from the config
sudo qrencode -t ansiutf8 < /etc/wireguard/client1.conf

sudo apt update
sudo apt install openvpn easy-rsa -y

# Initialize Easy-RSA
mkdir -p ~/easy-rsa
ln -s /usr/share/easy-rsa/* ~/easy-rsa/
cd ~/easy-rsa
 
# Configure variables
tee vars << 'EOF'
set_var EASYRSA_ALGO ec
set_var EASYRSA_DIGEST sha512
set_var EASYRSA_CURVE secp384r1
set_var EASYRSA_REQ_COUNTRY "US"
set_var EASYRSA_REQ_PROVINCE "California"
set_var EASYRSA_REQ_CITY "San Francisco"
set_var EASYRSA_REQ_ORG "MyOrg"
set_var EASYRSA_REQ_EMAIL "admin@example.com"
set_var EASYRSA_CA_EXPIRE 3650
set_var EASYRSA_CERT_EXPIRE 365
EOF
 
# Initialize PKI
./easyrsa init-pki
 
# Create CA (Certificate Authority)
./easyrsa build-ca nopass
 
# Generate server certificate
./easyrsa gen-req server nopass
./easyrsa sign-req server server
 
# Generate client certificate
./easyrsa gen-req client1 nopass
./easyrsa sign-req client client1
 
# Generate TLS authentication key
openvpn --genkey secret /etc/openvpn/ta.key
 
# Generate DH parameters (can be skipped when using EC)
# ./easyrsa gen-dh

sudo cp ~/easy-rsa/pki/ca.crt /etc/openvpn/server/
sudo cp ~/easy-rsa/pki/issued/server.crt /etc/openvpn/server/
sudo cp ~/easy-rsa/pki/private/server.key /etc/openvpn/server/
sudo cp ~/easy-rsa/ta.key /etc/openvpn/server/ 2>/dev/null || sudo cp /etc/openvpn/ta.key /etc/openvpn/server/

sudo tee /etc/openvpn/server/server.conf << 'EOF'
# Listening port and protocol
port 1194
proto udp
dev tun
 
# Certificate files
ca /etc/openvpn/server/ca.crt
cert /etc/openvpn/server/server.crt
key /etc/openvpn/server/server.key
tls-auth /etc/openvpn/server/ta.key 0
 
# Encryption settings
cipher AES-256-GCM
auth SHA256
tls-version-min 1.2
 
# Network settings
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist /var/log/openvpn/ipp.txt
 
# Push routes and DNS to clients
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 1.1.1.1"
 
# Allow client-to-client communication
client-to-client
 
# Keepalive
keepalive 10 120
 
# Security
user nobody
group nogroup
persist-key
persist-tun
 
# Logging
status /var/log/openvpn/openvpn-status.log
log-append /var/log/openvpn/openvpn.log
verb 3
mute 20
 
# Maximum clients
max-clients 50
EOF

# Create the log directory
sudo mkdir -p /var/log/openvpn
 
# Enable IP forwarding
echo "net.ipv4.ip_forward = 1" | sudo tee -a /etc/sysctl.d/99-openvpn.conf
sudo sysctl -p /etc/sysctl.d/99-openvpn.conf
 
# Configure NAT
sudo iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
 
# Persist iptables rules
sudo apt install iptables-persistent -y
sudo netfilter-persistent save
 
# Start OpenVPN
sudo systemctl enable --now openvpn-server@server
 
# Firewall
sudo ufw allow 1194/udp

# Create the client .ovpn configuration file
cat << 'EOF' > ~/client1.ovpn
client
dev tun
proto udp
remote your-server-ip 1194
resolv-retry infinite
nobind
persist-key
persist-tun
remote-cert-tls server
cipher AES-256-GCM
auth SHA256
key-direction 1
verb 3
EOF
 
# Embed certificates (generate a single-file config)
echo "<ca>" >> ~/client1.ovpn
cat ~/easy-rsa/pki/ca.crt >> ~/client1.ovpn
echo "</ca>" >> ~/client1.ovpn
 
echo "<cert>" >> ~/client1.ovpn
cat ~/easy-rsa/pki/issued/client1.crt >> ~/client1.ovpn
echo "</cert>" >> ~/client1.ovpn
 
echo "<key>" >> ~/client1.ovpn
cat ~/easy-rsa/pki/private/client1.key >> ~/client1.ovpn
echo "</key>" >> ~/client1.ovpn
 
echo "<tls-auth>" >> ~/client1.ovpn
cat /etc/openvpn/server/ta.key >> ~/client1.ovpn
echo "</tls-auth>" >> ~/client1.ovpn

# WireGuard status
sudo wg show
sudo wg show wg0 latest-handshakes
sudo wg show wg0 transfer
 
# OpenVPN status
sudo cat /var/log/openvpn/openvpn-status.log
sudo journalctl -u openvpn-server@server -f
 
# View connected clients
# WireGuard
sudo wg show wg0 peers
# OpenVPN
sudo cat /var/log/openvpn/openvpn-status.log | grep "CLIENT_LIST"

# Check IP forwarding
sysctl net.ipv4.ip_forward
 
# Check NAT rules
sudo iptables -t nat -L -n -v
 
# Check listening ports
ss -ulnp | grep -E "(51820|1194)"
 
# Test connectivity
ping 10.0.0.1    # WireGuard server
ping 10.8.0.1    # OpenVPN server
 
# WireGuard debugging
sudo wg show wg0
# If there is no handshake time, check the firewall and port
 
# OpenVPN debugging
sudo tail -f /var/log/openvpn/openvpn.log
 
# Client connection test
curl ifconfig.me  # Check if the exit IP is the VPN server